[Pre-Order] AUTEL MaxiFlash VCMI Advanced 5-IN-1 VCMI Works With Autel Ultra and Autel Ultra EV

Product Description

AUTEL MaxiFlash VCMI 

The MaxiFlash VCMI J2534 interface is a Bluetooth-enabled vehicle communication Measurement Interface (VCMI) J2534-1 and J2534-2 compliant pass-thru programming device, includes Built-in 4-Channel Oscilloscope & Digital Volt Ohm Meter and Built-in Waveform Generator & CAN bus tester. The MaxiFlash VCI can be Communication Interface (VCI) and J2534 pass-thru programmer; Includes Built-in 4-Channel Oscilloscope & Digital Volt Ohm Meter;Includes Built-in Waveform Generator & CAN bus tester; Wi-Fi/Bluetooth-capable

This is Pre-Order Item, No Stock. 
After You Finish Payment, Need To Wait About 10-20 Working Days Normally 

Highlights:

1. Work with MaxiSYS Ultra / Ultra EV, MaxiSYS MS919 / MS919EV
2. Built-in 4-Channel Oscilloscope & Digital Volt Ohm Meter
3. Built-in Waveform Generator & CAN bus tester.
4. This is VCI Bluetooth Adapter Can Only Works With Autel Series Products
5. Supports CAN FD, 4 CAN Channel, D-PDU, IS O22900-1 & ISO 22900-2 Protocols; and is RP1210 Compliant
6. If The VCI Bluetooth Adapter of Your Device is Broken or Lost, You Can Buy a New One to Replace It
7. Used with a Windows Computer with an Applicable OE Subscription for Vehicle Module Programming and Compatible, GM, TOYOTA, BMW, and Mercedes Vehicle Module Programming



Functions:

1. Built-In Oscilloscope

The 4 Channel Oscilloscope is faster with 20MHz Bandwidth, more accurate with 80MS/s Sampling Data Rate, and a 32M memory buffer that stores more complex signals, zoom and replay.
Our pre-set Guided Test and Waveform Library instruct technicians on use and fault analysis We also provide a large number of cloud preset cases, including connection diagrams, waveform library, reference waveforms, fault case analysis, and one-press waveform settings.



2. Built-In Waveform Generator

1) The Waveform Generator is used to test a sensor, an actuator, or an ECU without the need to replace them one by one to identify the fault.
2) This is done by simulating signals of various sensors and ECUs, and identifying hardware issues.
3) Simulates sensor signals to quickly diagnose ECU, sensor, and wiring harness issues;
4) Simulates ECU signals to perform active tests to verify functions of certain parts (Electronic fan, solenoid valves, etc);
5) Simulates actuator signals and verifies the communication status between the actuator and ECU (Electronic fan, solenoid valve, headlight)



3. Built-In Multimeter

The professional Multimeter will measure Voltage, Current, Resistance, Diode, Frequency/Period, Duty Cycle, Connectivity, and Pulse Width.



4. Built-In CAN Bus Check

The CAN Bus Check can quickly determine whether the OBD pins are functioning correctly



5. CAN FD / DoIP PROTOCOLS

J2534 BRING CAN FD / DoIP/ SAE J2534/ D-PDU/ RP1210 PROTOCOLS
* CAN FD: For MY2020+ FM Models, No Need CAN FD Adapters
* DoIP: For BMW E/ F/ G Chassis, Jaguar, and Land Rover vehicle make.

Package List:

1pc x AUTEL MaxiFlash VCMI

---

---

Contact Information:

Email: sales@AutelStore.co.uk
Whatsapp: +86-13429866263
Wechat: +86-13429866263